D-Link DES-3250TG, Справочное руководство по интерфейсу командной строки

Страница: 15 / 322

DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
15
Figure 1-2. Boot Screen
The switch’s MAC address can also be found from the Web
management program on the Switch Information (Basic Settings)
window on the Configuration menu.
The IP address for the switch must be set before it can be managed
with the Web-based manager. The switch IP address can be
automatically set using BOOTP or DHCP protocols, in which case the
actual address assigned to the switch must be known.
The IP address may be set using the Command Line Interface (CLI)
over the console serial port as follows:
1. Starting at the command line prompt, enter the commands
config ipif System ipaddress xxx.xxx.xxx.xxx |
yyy.yyy.yyy.yyy.
Where the x ’s represent the IP address
to be assigned to the IP interface named System and the
y ’s represent the corresponding subnet mask.
2. Alternatively, you can enter config ipif System ipaddress
xxx.xxx.xxx.xxx|z . Where the x ’s represent the IP