D-Link DES-1228/ME Скачать руководство пользователя страница 69

Страница: 69 / 267

DES-1228/ME Layer 2 Fast Ethernet Managed Switch

- Indicates that SNMP version 2 is in use.

- Indicates that SNMP version 3 is in use.

Auth-Protocol

None

- Indicates that no authentication protocol is in use.

MD5

- Indicates that the HMAC-MD5-96 authentication level will be used.

SHA

- Indicates that the HMAC-SHA authentication protocol will be used.

Priv-Protocol

None

- Indicates that SNMP messages will not be encrypted.

DES

- Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56)

standard.

To return to the SNMP User Table, click the

Show All SNMP User Table Entries

link. To add a new entry to the

SNMP User

Table Configuration

window, click on the

Add

button on the

SNMP User Table

window. This will open the

SNMP User Table

Configuration

window, as shown below.

Figure 6- 31. SNMP User Table Configuration window

The following parameters can set:

Parameter Description

User Name

Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP user.

Group Name

This name is used to specify the SNMP group created to which the SNMP user will belong.

SNMP V3 Encryption

Checking the corresponding box will enable encryption for SNMP V3 and is only operable in
SNMP V3 mode.

Auth-Protocol

MD5

- Specifies that the HMAC-MD5-96 authentication level will be used. This field is only

operable when

is selected in the SNMP Version field and the Encryption field has been

checked. This field will require the user to enter a password.

SHA

- Specifies that the HMAC-SHA authentication protocol will be used. This field is only

operable when

is selected in the SNMP Version field and the Encryption field has been

checked. This field will require the user to enter a password.

Priv-Protocol

None

- Specifies that no encryption will be used.

DES

- Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56)

standard. This field is only operable when

is selected in the SNMP Version field and the

Encryption field has been checked. This field will require the user to enter a password
between 8 and 16 alphanumeric characters.

To implement changes made, click

Apply

. To return to the SNMP User Table, click the

Show All SNMP User Table Entries

link.

Содержание DES-1228/ME











































































































































































































































































Результаты поиска

Содержание DES-1228/ME

Отзывы:

Бренды по названию

Популярные бренды

D-Link DES-1228/ME, Руководство пользователя

Результаты поиска

Содержание DES-1228/ME

Отзывы:

Бренды по названию

Популярные бренды