D-Link DES-1228/ME Скачать руководство пользователя страница 251

Страница: 251 / 267

Tech Support

Technical Support

You can find software updates and user documentation on the D-

Link website.

D-Link provides free technical support for customers within the

United States and within Canada for the duration of the service

period, and warranty confirmation service, during the warranty

period on this product. U.S. and Canadian customers can contact

D-Link technical support through our website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

USA - 877-DLINK-55 (877-354-6555)

D-Link Technical Support over the Internet:

http://support.dlink.com

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

877-354-6560

D-Link Technical Support over the Internet:

http://support.dlink.com

Содержание DES-1228/ME











































































































































































































































































Результаты поиска

Содержание DES-1228/ME

Отзывы:

Бренды по названию

Популярные бренды

D-Link DES-1228/ME, Руководство пользователя

Результаты поиска

Содержание DES-1228/ME

Отзывы:

Бренды по названию

Популярные бренды