DES-1218/DES-1226 10/100/1000 Mbps Ethernet Switch User’s Guide
10
DES-1226
Figure 3-2. Front panel view of the DES-1226
♦
An RS-232 DCE console port for setting up and managing the switch via a
connection to a console terminal or PC using a terminal emulation program.
♦
16 or 24 high-performance, NWay Ethernet ports all of which operate at 10/100
Mbps for connections to end stations, servers and hubs. All ports can auto-
negotiate between 10Mbps or 100Mbps, full or half duplex, and flow control.
♦
MDI-X/MDI-II button for port 1x located between the RS-232 DCE console port
and the RJ-45 UTP ports. This port can be put in uplink (MDI-II) position by
pushing the button in.
♦
Slot for optional 2 port Gigabit Ethernet module.
Rear Panel
The rear panel contains the AC power connector. The AC power connector is a standard
three-pronged connector that supports the power cord. Plug-in the female connector of
the provided power cord into this socket, and the male side of the cord into a power
outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.
Figure 3-3. Rear panel view of the Switch.
