19
D-Link DCS-935L User Manual
Section 2 - Installation
Mounting the Camera
To mount your camera on a wall or ceiling, please follow the steps below. We recommend that you configure your camera before mounting it.
Step 1
Use a pencil to mark two points on the wall or ceiling that are 40 mm (1.6 in) apart. Use a 6mm drill bit to
drill two holes 25mm deep (about 1 in deep) where you marked. Insert the screws into the holes. When you
tighten the screws, leave 2mm for fitting the mounting base over the screw-heads.
Step 2
Place the mounting base over the screws that are inserted into the wall or ceiling. Make sure to fit the screw-
heads over the big holes in the base, and slide the mounting base downward to lock it firmly into place. Lightly
pull the base forward to make sure that it is locked. Adjust the angle of the camera as needed.
Note:
If the wall is made out of concrete, before inserting the screws, insert the plastic anchors to support the screws.