40
D-Link DCS-930L User Manual
Section 4 - Configuration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable uploading
of images to an
FTP server:
Image
Frequency:
This is the IP address of the FTP server that you will be connecting to.
Default is port 21. If changed, external FTP client program must change the
server connection port accordingly.
Specifies the user name to access the external FTP server. If you are to upload
snapshots to an FTP server you will need to fill in the Domain name or IP address
of your external FTP server. The following user settings must be correctly
configured for remote access.
Specifies the password to access the external FTP server.
Specifies the destination folder in the external FTP server.
Enabling passive mode will allow access to an external FTP server if your camera
is behind a router protected by a firewall.
Check to enable this option allowing snapshots to be uploaded to the FTP server
using the settings entered above.
• Choosing
Always
will continuously upload snapshots to the FTP server,
beginning right away.
• Choosing
Schedule
will allow you to select a schedule for when to start and
stop the uploading of snapshots.
• Select
Motion/Sound Detection
if you would like to upload snapshots only
when motion or sound is detected.
Select the rate at which you want the camera to take snapshots. The user can
define both
Frames/Second
and
Seconds/Frame
.
• If
Always
is selected, snapshots will be continuously uploaded according to
the selected image frequency.
• If
Schedule
is selected, snapshots will be uploaded according to this image
frequency during the days and times specified in the schedule.
• If
Motion/Sound Detection
is selected, snapshots will be uploaded
according to this image frequency while motion or sound is being detected.
This section allows you to configure the camera to send snapshots to an FTP server.
