31
D-Link DCS-930L User Manual
Section 4 - Configuration
Wireless Setup
Wireless settings are enabled by default. Click Disable to disable wireless settings.
Enter a Service Set Identifier, or a unique name, for your wireless network.
The default setting is channel 6. Select the same channel that is being used by
other wireless devices within your network. When there is interference from the
wireless networks that overlap with one another, you can change the channel to
obtain better performance.
Select
Infrastructure
if you are connecting your camera to a wireless router or
access point. Use
Ad-Hoc
if you are wirelessly connecting to your PC without a
wireless router or access point.
Click this to scan for available wireless networks to connect to. You will then be
able to select a wireless network from a list of available networks.
For security, there are three choices;
None
,
WEP
, and
WPA-PSK / WPA2-PSK
.
Select the encryption method that is being used by your wireless device/router.
If you choose WPA-PSK/WPA2-PSK as your wireless security mode, enter the
key(password) for your wireless network.
Click
Save Settings
to save your settings.
Wireless Settings:
SSID:
Channel:
Connection Mode:
Site Survey:
Wireless Security
Mode:
WPA-PSK /
WPA2-PSK
Settings:
This section allows you to setup and configure the wireless settings on your camera.
