D-Link DCS-820L, Быстрая установка

Страница: 7 / 16

Mount the Camera
Please refer to the steps below to assist you with mounting the camera.
We suggest that you configure the camera before mounting.
Warning: Indoor use only. Do not mount in a location where it may
be in contact with water as it may damage the product and/or cause
injury
.
Use a 6mm drill bit to drill two holes 43mm
apart, and at least 30mm deep. Then use a mallet
o insert the wall anchors into the holes.
crew the included screws into the wall anchors.
43mm
30mm
Place the mounting holes on the base of the
camera over the screws as shown, then slide the
amera down to mount the camera.
FCC ID: KA2CS825LA1
IC: 4216A-CS825LA1
CAN ICES-3 (B)/NMB-3(B)
Model: DCS-820LA1
DCS-820L
7