D-Link DCS-80-5, Быстрое руководство по установке

Страница: 4 / 28

4

D-Link DCS-80-5/6 Outdoor Power Box
E
N
G
LI
S
H
4

D-Link DCS-80-5/6 Outdoor Power Box
Installation
Step 1: Obtain the 22-pin data cable from the
camera packaging.
Step 5: Thread the 22-pin data cable through
the C2 or C4 port of the Power Box. Be sure to
pull all wires through completely.
Step 6: Connect the AC 24 V cables to the
power terminal block (J2).
Step 2: Identify the 3-pin AC 24 V connector
(red/yellow/black). Cut the wires.
Step 3: Identify the BNC video out connector.
Cut the wire.
NOTE: This analog video output is not required
for installation and can safely be removed.
Step 4: Remove wire shielding of from the AC
24 V cables with a wire stripper. Expose 3 mm
of naked wire.
Step 8: Secure the brass pillar to the circuit
board.
Step 7: Make sure the AC 24 V cables are in
the right order.
Pin 1 Pin 2 Pin 3
Red Yellow Black
Table 6. Pin/Wiring Definitions