46
D-Link DCS-6115 User Manual
Section 3: Configuration
Add Event
You can create and schedule up to three
Events
.
Event name:
Enable this event:
Priority:
Delay:
Video Motion
Detection:
Periodic:
Digital Input:
System Boot:
Network Lost:
Time:
Trigger D/O:
Enter a
Name
for the
Event
.
Check the box to
Enable.this.event
.
Select the
Priority
level for this
Event
. The one with
the higher priority will be executed first.
Enter the
Delay
(time in seconds) before checking
for the next event. The delay time is used for both
motion detection and digital input triggers.
Click to set the
Trigger
to
Video.motion
detected
during live video monitoring.
Click to trigger an
Event
at specified intervals, and
enter a value in minutes.
Click to trigger an
Event
when DI status changes.
Click to trigger an
Event
when the system boots up.
Click to trigger an
Event
whenever the network
connection is lost.
Select days of the week the Event should be
performed or click
Always
for every day, or click
From
and specify a time range.
Check the box to trigger Digital Output for a
specified number of seconds and enter a value.
Click
Save.Settings.
DCS-6115
