45
D-Link DCS-4701E User Manual
Section 3: Configuration
Advanced
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync with ICR:
Schedule:
The Day/Night mode is set automatically. You can use the
Sensitivity drop-down box to set when the camera will
switch to Night mode. The text box to the right shows
what lighting conditions are currently being detected
by the camera for reference. You can refresh this status
by clicking the
Refresh
button.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR filter is disabled
(night mode).
The IR light will turn on or off according to the schedule
that you specify below.
