1
D-Link DCS-340 User Manual
Section 3 - Configuration
Next, click the
Applications
button under the
Tools
tab to set the application settings for the
DCS-3420.
In this window, follow the steps below to set the
application settings for snapshots to be sent to your
email account or FTP server when triggered by a
motion sensor or other external device:
1. Select the weekdays you would like to record
and enter the “Snapshots begin” time and
“Snapshots end” time for the weekly schedule,
or select “All the time except for the above
schedule” if you want to enable full time
snapshot recording.
2. Check “Event operation.”
3. Set the delay “before detecting next event” to
avoid continuous false alarms following the
original event.
4. Set the “Snapshot Interval” to capture the
direction of the moving object.
5. Check the trigger condition for input and motion
detection (in this case “Input is Low”).
6. Check “Trigger output alarm while input
condition matched” and “Upload snapshots
while motion detected.”
7. Select to either send snapshots by email or by
FTP.
Click the
Apply
button when finished. You are now able
to send snapshots, based on triggered recording, to
your email account or FTP server.
