DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor
User’s Manual
The table on the bottom of this page shows the information of DHCP clients including the
IP and MAC addresses of each PC. Since MAC addresses are unique and permanently
fixed into hardware, you can identify any PC listed by its MAC address. The DCM-604
provides leases for 3600 seconds (default), and has an automatic renewal mechanism that
will keep extending a lease as long as the associated PC remains active.
You can cancel an IP address lease by selecting it in the DHCP Client Lease Info list and
then clicking the
Force Available
button. If you do this, you may have to perform a DHCP
Renew on that PC, so it can obtain a new lease.
5.4 Advanced
The Advanced page allows you to enable/disable some advanced features of the DCM-
604.
5.4.1 Options
The Options page allows you to enable/disable some advanced features supported by
DCM-604
.
Check the option you want to use and click
Apply
button to enable the function(s).
WAN Blocking:
To prevent others on the WAN side from being able to ping your
DCM-604. With WAN Blocking on, your DCM-604 will not respond to pings it receives,
effectively “hiding” your gateway.
Ipsec PassThrough:
To enable IpSec type packets to pass through between WAN
and LAN.
PPTP PassThrough:
To enable PPTP type packets to pass through between WAN
and LAN.
Remote Config Management:
To make the Web Management pages of your DCM-
604 accessible from the WAN side. Page access is limited to only those who know the
DCM-604 access password you set in the
Status--Security
page.
When accessing the DCM-604 from a remote location, you must use HTTP port 8080
and your IP address. This is the "WAN IP address" that appears at the
Basic--Setup
13
