D-Link DAS-3626 Скачать руководство пользователя

Страница: 72 / 177

DAS-3626 VDSL2 Switch User Manual

The following fields can be set:

Parameter Description

VLAN Name

This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.

VID (2-4094)

This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.

State

Use the drop-down menu to toggle between

Enabled

and

Disabled.

Replace Source IP

Enter an IP address that new IP address to be used.

Member Port
(e.g.:1,6)

Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)

Source Port
(e.g.:1,6)

Select the source Port for the Multicast VLAN.

Tagged Member
Port (e.g.:1-4,6)

Select the ports that will be tagged as members of the VLAN.

To modify an entry click the corresponding

Modify

button. To remove an entry click the corresponding

Delete

button.

Multicast Forwarding

The following figure and table describe how to set up

Multicast Forwarding

on the switch.

To view this window, click

Switch Configuration > Forwarding & Filtering > Multicast Forwarding

as shown

below:

Figure 85. Multicast Forwarding menu

The following parameters can be set:

Parameter Description

VID

The VLAN ID of the VLAN to which the corresponding MAC address belongs.

Multicast MAC
Address

The MAC address of the static source of multicast packets. This must be a multicast MAC
address.

Port Settings

Allows the selection of ports that will be members of the static multicast group and ports
either that are forbidden from joining dynamically, or that can join the multicast group
dynamically, using GMRP. The options are:

None

– No restrictions on the port dynamically joining the multicast group. When None is

chosen, the port will not be a member of the Static Multicast Group.

Egress

– The port is a static member of the multicast group.

Click

Apply

to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the

corresponding

Delete

button. All the entries will be shown on the lower half of the

Multicast Forwarding Table

window.

Содержание DAS-3626

















































































































































































Результаты поиска

Содержание DAS-3626

Отзывы:

Похожие инструкции для DAS-3626

Бренды по названию

Популярные бренды

D-Link DAS-3626, Руководство пользователя

Результаты поиска

Содержание DAS-3626

Отзывы:

Похожие инструкции для DAS-3626

Бренды по названию

Популярные бренды