42
D-Link DAP-3410 User Manual
Section 3 - Configuration
Parental Control
Active:
Comment:
MAC Address:
Local IP:
Destination IP:
Protocol:
Local Port:
Destination
Port:
Select to either
Disable
or
Enable
the Parental
Control feature.
You can enter a comment here for each rule
that is created.
Enter the MAC address to be monitored and
click
Save
to add it to the parental control list.
Enter the start and end of an IP address
range that you would like to filter on the local
network. This is normally used to prevent
access to certain parts of the internal network.
Enter the start and end of an IP address range
that you would like to filter on the destination
network. This is normally used to prevent
access to certain parts of the external network.
Specify which protocol to filter.
Enter the specific port to filter on the local
network.
Enter the specific port to filter on the destination
network.
Parental Control is used to allow you to set up a range
of IP Addresses that can be either be blacklisted or
whitelisted to certain MAC addresses on the network.
