D-Link DAP-2660 User Manual
28
Channel Width:
Captive Profile:
Remote AP MAC
Address:
Site Survey:
Authentication:
Allows you to select the channel width you would like to operate in. Select
20 MHz
if you are not using any 802.11n wireless
clients.
Auto 20/40 MHz
allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network.
Select the enable or disable the captive portal feature here.
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Click on the
Scan
button to search for available wireless networks, then click on the available network that you want to
connect with.
Select the wireless authentication method to use here. In the
WDS
mode, the following authentication methods are supported:
Open System
and
WPA-Personal
.
For more information about the wireless security, refer to
