D-Link DAP-2660 User Manual
15
Authentication:
Encryption:
Key Type:
Key Size:
Key Index (1~4):
Network Key:
Confirm Key:
Select the wireless authentication method to use here. Options to choose from are
Open System
,
Shared Key
,
WPA-Personal
,
WPA-Enterprise
, and
802.1X
. After selecting the
Shared Key
option, the following parameters will be available for configuration.
Shared Key will limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this
option is not available.
Select to
Enable
or
Disable
wireless
encryption here.
When the encryption option is enabled,
select the key type here. Options to choose
from are
HEX
and
ASCII
.
When the encryption option is enabled,
select the key size here. Options to choose
from are
64 Bits
and
128 Bits
.
Select the key index value used here. The keys 1 to 4 can be selected.
Enter the wireless WEP key in the space provided here. When HEX was selected as the key type, the network key must
consist out of the numbers 0 to 9 and the letters A to F. When ASCII was selected as the key type, the network key can
consist out of any ASCII characters.
Re-enter the wireless WEP key in the space provided. This key must be identical to the network key entered previously.
Shared Key
will send a request to the access point and if the key used matches the one configured on the access point, the access point will send a challenge
to the client. The client will then again send a confirmation of the same key back to the access point where the access point will either return a successful or a
denial packet back to the wireless client.
Access Point Mode (2.4GHz) - Shared Key
