D-Link DAP-2590 - AirPremier N Dual Band PoE Access..., Руководство пользователя

Страница: 19 / 90

19 D-Link DAP-590 User Manual
Section - Configuration
WDS mode
In WDS mode, the DAP-2590 wirelessly connects multiple networks,
without functioning as a wireless AP. After completing the desired
settings, click the
Save button to let your changes take effect.
WDS is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is
dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Mode:
Network Name
(SSID):
SSID Visibility:
Wireless Band:
Select either
2.4 GHz or 5 GHz from the pull-down
menu.
Auto Channel
Selection:
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in WDS mode.
Channel:
Channel Width:
Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n
and non-802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4� and Mixed
802.11 a/n in 5�. 802.11n wireless devices are allowed to transmit data using 40 MHz when the channel width is
Auto
20/40 MHz.