DAP-1820 Install Guide
5
4
When the Status LED turns
solid green
(
may take up to 3 minutes
), this indicates
that your Range Extender is securely connected to your wireless router.
Note:
If the Status LED on your Range Extender does not turn solid green
after running WPS setup, try resetting the unit (
see
Troubleshooting
-
What
if I forgot my Range Extender’s Admin password or want to reset my Range
Extender?
) and try WPS setup again. If it still does not turn solid green after
following all the steps, see
Method Two: D-Link Wi-Fi Setup,
on page 6.
Signal Strength Indicator
Very Weak (1 x Amber)
Weak (1 x Green)
Good (2 x Green)
Strong (3 x Green)
Your setup is complete!
You can now unplug and move your Range Extender to a
location between your Wireless Router and the area where you want wireless coverage.
By default, your
Range Extender will share the same name and password as your
Router.
If after moving your Range Extender, the signal strength indicator is showing one
single amber bar or if your Range Extender LED does not turn solid green within 3
minutes, move your Range Extender to a wall outlet closer to your wireless router.
