20
D-Link DAP-1610 User Manual
Section 3 - Configuration
Web-based Setup
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
To access the setup utility for the DAP-1610 AC1200 Wi-Fi Range Extender on
your PC, first connect to the DAP-1610 wirelessly using the Wi-Fi name (SSID) and
password located on your Wi-Fi Configuration Card. Then open a web browser
and enter
http://dlinkap.local./
in your browser’s URL field. You may also enter
the IP address* of the DAP-1610.
* The default IP address is 192.168.0.50. Once your DAP-1610 connects to the host network,
it will be assigned a new IP address based on your network’s DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1610.
For multiple DAP-1610s, go to
http://dlinkapxxxx.local.
as
shown on the included Wi-Fi
Configuration Card, with “xxxx” being the last four digits of the DAP-1610’s MAC address.
The configuration interface will open, and you can configure the various settings
for the DAP-1610. If you have not yet configured an uplink network, the home
screen will show that there is no connection between the DAP-1610 and the
uplink router.
