![background image](http://html.mh-extra.com/html/d-link/dap-1160/dap-1160_user-manual_78357033.webp)
33
D-Link DAP-1160 User Manual
Section 3 - Configuration
Save to Local
Hard Drive:
Upload from
Local Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Use this option to save the current access point
configuration settings to a file on the hard disk of the
computer you are using. Click the
Save
button. You will
then see a file dialog where you can select a location
and file name for the settings.
Use this option to load previously saved access point
configuration settings. Click
Choose File
to find a
previously saved configuration file. Then, click the
Upload Settings
button to transfer those settings to
the access point.
This option will restore all configuration settings back
to the settings that were in effect at the time the access
point was shipped from the factory. Any settings that
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the
Save
button above.
Note:
Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
System