![background image](http://html.mh-extra.com/html/d-link/dap-1160/dap-1160_user-manual_78357026.webp)
26
D-Link DAP-1160 User Manual
Section 3 - Configuration
Device Name:
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It is
recommended to change the Device Name if
there is more than one D-Link device within the
subnet. You can enter the device name of the
AP into your web browser to access the instead
of IP address for configuration. If you are using
the device name to connect, ensure that your
PC and your DAP-1160 are on the same network.
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The
default IP address is 192.168.0.50. If you change
the IP address, once you click
Apply
, you will
need to enter the new IP address in your browser
to get back into the configuration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access point will not accept the IP
address if it is not in this format.