24
D-Link COVR-P2502 User Manual
Section 3 - Configuration
Network
This section will allow you to change the local network settings of the
extender and to configure the DHCP settings.
In the Settings menu on the bar on the top of the page, click
Network
. Click
Advanced Settings...
to expand the list and see all of the options.
Network Settings
Management
Link:
Enter a management link. This link is used to access the extender's web
interface. If changed, you will need to enter this new link into a web
browser to access the configuration utility. The default management
link is
http://covr.local./
Advanced Settings
IPv4
My Internet
Connection is:
Select either
Dynamic IP (DHCP)
if you want the extender to
automatically receive its network information from the router
(recommended), or select
Static
to manually configure the extender's
network settings.
IP Address:
If you selected
Static
, enter a valid IP address.
Subnet Mask:
If you selected
Static
, enter a valid subnet mask.
Gateway Address:
If you selected
Static
, enter a valid gateway IP address.
Primary DNS:
If you selected
Static
, enter a primary DNS address.
Secondary DNS:
If you selected
Static
, enter a secondary DNS address.
