25
D-Link DCS-931L User Manual
25
Section 3 - Configuration
Wireless Setup
Check this box to allow your camera to connect to your network wirelessly.
Enter the network name(SSID) of the wireless network you want to connect
to. You can also click the
Site Survey
button below to choose an available
network and fill in settings automatically.
If you are using
Ad-Hoc
as your connection mode, select the same channel
that is being used by your wireless network.
Select the connection mode used by your wireless network. In most cases,
you should select
Infrastructure
.
Ad-Hoc
is only used if your camera is
directly connecting to another PC or device.
Click this button to select an available wireless network to connect to.
Select the wireless security mode used by your wireless network. If you
select
WEP
or
WPA-PSK/WPA2-PSK
, enter the password for your wireless
network in the text box that appears.
Enable Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security Mode:
This section allows you to set up and configure the wireless settings on your camera.
