D-Link AirPremier N DAP-2690 Скачать руководство пользователя | Manualshive

Страница: 93 / 95

background image

93

D-Link DAP-2690 User Manual

Appendix B - Warranty

Trademarks:

D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their

respective owners.

Copyright Statement:

No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the

United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.

Copyright ©2014 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.

CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take

adequate measures.

Power Usage

This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby

mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed.

Network Standby: 3.86watts

Switched Off: 0.23 watts

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

«
...
91
92
93
94
95
»

Содержание AirPremier N DAP-2690
































































































Отзывы:

Нет отзывов

Похожие инструкции для AirPremier N DAP-2690

Бренд: CAME Страницы: 4

Бренд: Abocom Страницы: 11

Бренд: Abocom Страницы: 19

Бренд: Harman Kardon Страницы: 66

Бренд: Dahua Страницы: 24

Бренд: IDT Страницы: 281

DMX-Universal-Demux

Бренд: DMX4ALL Страницы: 17

Бренд: Rockwell Automation Страницы: 108

CompactPCI CC8-BLUES

Бренд: EKF Electronik Страницы: 52

Dimension ES-3124

Бренд: ZyXEL Communications Страницы: 228

Бренд: Lutron Electronics Страницы: 4

Бренд: Intel Страницы: 958

Бренд: mikroElektronika Страницы: 2

Бренд: Powerleap Страницы: 28

McDATA Eclipse 1620

Бренд: Sun Microsystems Страницы: 9

Бренд: Robotis Страницы: 10

Бренд: Allied Telesis Страницы: 44

Dablet DVP 5000

Бренд: DarbeeVision Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды