5
TM
Step 3:
Launch a web browser, type the default IP address of the Access
Point (
http://192.168.0.50
) and press
Enter
. Skip to Step 4 on the next page.
If your network
does not
automatically assign IP addresses
( No DHCP
service ), follow these steps to properly configure your Access Point:
Deploying Your Access Point
without
Dynamic IP Addressing
Option 2:
Step 1:
Connect the Access Point directly to your computer using an
Ethernet cable.
Step 2:
Configure the Ethernet connection of your computer as follows:
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
DAP-2555
PC or Mac
Configure APs One-by-One
Step 1:
Connect the Access Points to the same network as your computer
using a switch and/or router.
Configure Multiple APs at Once
DAP-2555s
PC or Mac
Router or Switch
