4
If your network
automatically assigns IP
addresses
( DHCP service ), connect
the Access Point directly to the network by plugging an Ethernet cable into
the LAN port on its rear panel. Insert the cable’s other end into your existing
switch or router with Internet connectivity.
No additional configuration is required. Within a few minutes the Access
Point will self configure and become ready to use. You have the option
of later reconfiguring your Access Point to a static IP address using the
CloudCommand™ interface .
The DAP-2555 is PoE ( Power over Ethernet ) compliant. You can power it either
by using a PoE switch or the included power adapter. Once powered, the green
power LED will turn ON to indicate proper operation
.
Deploying Your Access Point
with
Dynamic IP Addressing
Option 1:
DAP-2555
Switch or Router
Internet
