D-Link Air Premier DAP-2695 Скачать руководство пользователя страница 24

Страница: 24 / 90

D-Link DAP-2695 User Manual

Section 3 - Configuration

Transmit Power:

WMM (Wi-Fi Multimedia):

Ack Time Out

(2.4 GHZ, 64~200):

Short GI:

IGMP Snooping:

Multicast Rate :

Maximum Multicast

Bandwidth :

Multicast Bandwidth

Control :

HT20/40 Coexistence :

Transfer DHCP Offer to

Unicast :

This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping

of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage is

intended for half of the area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or 12.5%.

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over

a Wi-Fi network.

To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between 25 and 200

microseconds for 5 GHz or from 64 to 200 microseconds in the 2.4 GHz in the field provided.

Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase

the error rate in some installations due to increased sensitivity to radio-frequency installations.

Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between

routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host

based on IGMP messages passing through the AP.

Select the multicast rate for 2.4GHz and 5GHz band.

Set the multicast packets maximum bandwidth pass through rate from the Ethernet interface to the Access Point.

Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, (2.4 GHZ and 5 GHZ) and WDS

with AP mode, including Multi-SSIDs.

Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz

and there is another wireless network’s channel over-lapping and causing interference, the Access Point will automatically change

to 20MHz.

Enable to transfer the DHCP Offer to Unicast from LAN to WLAN, suggest to enable this function if stations number is larger than 30.

Содержание Air Premier DAP-2695



























































































Результаты поиска

Содержание Air Premier DAP-2695

Отзывы:

Похожие инструкции для Air Premier DAP-2695

Бренды по названию

Популярные бренды

D-Link Air Premier DAP-2695, Руководство пользователя

Результаты поиска

Содержание Air Premier DAP-2695

Отзывы:

Похожие инструкции для Air Premier DAP-2695

Бренды по названию

Популярные бренды