14
Configuration Utility
Link Info
After clicking on the Configuration Utility icon, the
Link Info
screen will
display the following:
Status:
Displays the MAC Address of the Access Point that is associated
with the DWL-510.
SSID:
The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is set to
default
.
Frequency:
Display the frequency of the Access Point that is associated
with the DWL-510.
Wireless Mode:
Display wireless mode using infrastructure or Ad-Hoc mode.
Encryption:
Display the encryption with the connected wireless device is
enable or disable.
TxRate:
The factory setting is set to 11 Mbps; however, TxRate settings are
automatically determined by the DWL-510 depending on the distance from
the access point.
Channel:
Displays the channel information. By default, the channel is set to
6 and selection is automatically determined by the DWL-510.
Signal Strength:
Displays the Signal Strength represents the wireless signal
between the access point and the DWL-510. The percentage coincides with
the graphical bar.
Packet Count:
Displays the statistics of data transmitted and received.
