5000 Series Data Center Switches Hardware Installation Guide
24
2.
Once loaded, enter the default username and password
admin
to log into the Linux Shell.
Figure 4-5 D-Link OS Boot Screen
3.
If this is the first time logging into D-Link OS, enter the command
sudo license install [activation code]
to
activate the operating system. Refer to the license activation information for the required information. The switch
will need to be rebooted to continue. Once rebooted, repeat steps 1 and 2 to continue.
Figure 4-6 D-Link OS Activation
4.
Enter the command
sudo icos-cli
to enter the D-Link OS command interface.
Figure 4-7 D-Link OS Boot Screen
