D-CUT TA-070, Руководство по эксплуатации, Страница: 3 / 14

z
Keep work area well lit.
z
Avoid body contact with earthed or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators).
z
Do not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the
work area.
z
When not in use, tools should be stored in a dry locked-up place,
out of reach of children.
z
Do not force small tools to do the job of a heavy-duty tool.
z
Do not use tools for purposes not intended; for example do not
use circular saws to cut tree limbs or logs.
z
Do not wear loose clothing or jewelry; they can be caught in moving
parts.
z
Non-skid footwear is recommended when work out doors
z
Wear protective hair covering to contain long hair.
z
Where possible use clamps or a vice to hold the work. It is safer
than using your hand.
z
Keep cutting tools sharp and clean for better and safer
performance.
z
Follow instruction for lubricating and changing accessories.
z
Inspect tool cords periodically and if damaged have them repaired
by an authorized service facility.
z
Keep handles dry, clean and free from oil and grease.
z
When not in use, before servicing and when changing accessories
such as blades, bits and cutters, disconnect tools from the power
supply.
z
Form the habit of checking to see that keys and adjusting wrenches
are removed from the tool before turning it on.
z
Watch what you are doing, use common sense and do not operate the
tool when you are tired.
z
Before further use of tool, it should be carefully checked to
determine that it would operate properly and perform its intended
function.
z
Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may
affect its operation.
z
A guard or other part that is damaged should be properly repaired
or replaced by an authorized service centre unless otherwise
indicated in the instruction manual.
z
Have defective switches replaced by an authorized service centre.
z
Do not use the tool if the switch does not turn it on and off.
z
This electric tool complies with the relevant safety rules.
Qualified persons using original spare parts should only carry
out repairs, otherwise this may result in considerable danger to
the user.
3