background image

- 1 - 

IMPORTANT !

 

Please READ all instructions carefully before using this product. 
RETAIN this manual for future reference.

 

The specifications of this product may vary slightly from the illustrations and are subject to change without 
notice. 

Before You Start 

Thank  you  for  purchasing  this  Product!  For  your  safety  and  benefit,  read  this  manual  carefully 
before using the machine. 

Prior  to  assembly,  remove  components  from  the  box  and  verify  that  all  the  listed  parts  were 
supplied. Assembly instructions are described in the following steps and illustrations.

 

SAFETY & MAINTENANCE INSTRUCTION

 

BE SURE TO READ THE ENTIRE MANUAL BEFORE YOU ASSEMBLE OR OPERATE YOUR 
MACHINE. IN PARTICULAR, NOTE THE FOLLOWING SAFETY PRECAUTIONS: 

01- Once fully assembled, please check that all hardware parts such as bolts, nuts and washers are 
positioned and secured firmly. 

02-  Please  check  regularly  that  the  safety  chain  guard  that  protects  the  moving  parts  of  the 
machine is secured and in good order. 

03- Please always check the seat post, seat slider; pedals and handlebar are secured firmly before 
getting on the bike.   

04- To lubricate all moving parts annually is recommended.   

05- Do not wear loose clothing to avoid entangling in any moving parts.   

06- Do not remove feet from the pedals while they are in motion.   

07- Always wear shoes when using the machine.   

08- Dry the bike after each use to remove sweat and moisture. Wipe the machine with a damp cloth, 
water and mild soap. Do not use a petroleum-based solvent to clean the machine in order not to 
damage the finish. 

09- Please keep children away from the bike while it is in use. Do not allow children to use the bike. 
This bike is designed for adults, not children.   

10- Do not dismount the bike until the pedals have stopped completely.   

11-  Stop  exercise  immediately  in  case  of  nausea,  shortness  of  breath,  faint,  headache,  pain, 
tightness in your chest or any discomfort.   

12- Do not place fingers or any other objects into the moving parts of the bike.   

13- Prior to any exercise, consult with your physician first to establish the exercise frequency, time 
and intensity appropriate for your particular age and condition.   

14-  After  exercising,  please  pull  down  the  tension  controller  to  increase  resistance  so  that  the 
pedals will not rotate freely and possibly hurt someone. 

Содержание Stelvio








Отзывы: