background image

- 23 - 

WARNING:  ALWAYS  UNPLUG  THE  TREADMILL  FROM  THE  ELECTRICAL 
OUTLET BEFORE CLEANING OR SERVICING THE UNIT. 

 

CLEANING 

 

General cleaning or the unit will greatly prolong the treadmill. Keep treadmill clean by 
dusting  regularly.  Be  sure  to  clean  the  exposed  part  of  the  deck  on  either  side  of  the 
walking  belt  and  also  the  side  rails.  This  reduces  the  build-up  of  foreign  material 
underneath the walking belt.   

The  top  of  the  belt  may  be  cleaned  with  a  wet,  soapy  cloth.  Be  careful  to  keep  liquid 
away from inside the motorized treadmill frame or from underneath the belt.   

Warning: Always unplug the treadmill from the electrical outlet before removing 
the motor cover. 

At least once a year remove the motor cover and vacuum under the motor cover. 

 

RUNNING BELT AND DECK LUBRICATION 

 

This  treadmill  is  equipped  with  a  pre-lubricated,  low  maintenance  deck  system.  The 
belt/ deck friction  may play a major role in the function and life of your treadmill, thus 
requiring periodic lubrication. We recommend a periodic inspection of the deck. 

 

We recommend lubrication of the deck according to the following timetable: 

 

Light user (less than 3 hours/ week)                      annually     

 

Medium user (3-5 hours/ week)                              every six months 

 

Heavy user (more than 5 hours/ week)                  every three months 

 

 

Содержание AF-781





























Отзывы: