9 of 17
In the drawings below you will find the dimensions of the hole needed to mount the actuator and
be able to screw it in place using four (4) 1/4-20 screws. You will also find the dimensions of the
cutout hole for the actuator’s cable assembly.
5- Arm Rest mounting hole dimensions
Actuator cutout hole
Actuator cable assembly hole
Before making the connections between each ACM unit and its associated pair of actuators, you
should insert and screw down one actuator in each armrest and run the cable through the
actuator cable access hole (opening in the front of the actuator). When the actuators are properly
secured using four (4) 1/4-20 screws and a lock washer, you can connect the cable into the ACM
unit.
6- Setting up the actuators in the seat
Note: be careful not to damage the connectors or the aluminum plate at the end of the actuator’s
cable.
