background image

4

2. DECRIPCIÓN DEL tuit

Rf-12.64

Rf-15.64

Rf-215.96

- Two-way full-range system.
- Trapezoidal enclosure.
- Tripod socket.
- Passive (full-range) use.

format compression driver

with ASC protection.

- Nominal horn coverage angles (-6 dB): 60ºH x
40ºV.
- Sound reinforcement for fixed installations. Pubs,
restaurants, discos, indoor sport arenas.
- Secondary area fills.

- Two-way full-range system.
- Trapezoidal enclosure.
- Tripod socket.
- Bi-amplified and passive (full-range) modes.
- 1 x 12" woofer; 4” voice coil diameter.
- Medium format compression driver (3” voice coil
diameter) with ASC protection.
- Medium/high power.
- Medium sensitivity.
- Medium/large throw.
- Rotatable horn.
- Nominal horn coverage angles (-6 dB): 60ºH x
40ºV.
-Sound reinforcement for fixed installations. Pubs,
restaurants, discos, indoor sport arenas.
- Secondary area fills.

- Two-way full-range system.
- Trapezoidal enclosure.
- Bi-amplified and passive (full-range) modes.
- 2 x 15" woofers; 4” voice coil diameter.
- Neodymium magnet large format compression
driver, 4” voice coil diameter.
- Nominal horn coverage angles (-6 dB): 90ºH x
60ºV.
- High power.
- Medium / high sensitivity.
- Medium / long throw.
- Transport wheels.

- 1 x 12" woofer; 4” voice coil diameter.
- Medium

(3” voice coil

diameter)
- Medium/high power.
- Medium sensitivity.
- Medium/large throw.
- Rotatable horn.

sub-18H

sub-218G

- Sub-woofer system.
- Rectangular enclosure.
- Tripod socket for mid-high enclosures.
- 1 x 18" woofer; 4” voice coil diameter.
- Medium power.
- Medium sensitivity.
-

Low

frequency

reinforcement

for

fixed

installations. Pubs, bands, theaters.

- Sub-woofer system.
- Rectangular enclosure.
- 2 x 18" woofers; 4” voice coil diameter.
- High power.
- Medium sensitivity.
-

Low

frequency

reinforcement

for

fixed

installations and mobile applications. Live sound,
theaters, discos.

EN

Manual del Usuario

/ r

/

User’s Manual

eference

Содержание RF-12.64





























Отзывы: