20
Manual del Usuario
/ artec 300 series /
User’s Manual
As an example we will mount the following array:
1x
artec322S
+
4x
artec 320
, with angles: 0º, 0,5º, 1º
and 5º.
If we need to mount another sub below the first, we will need another
JP-320
, one piece on each side.
Both in the case of having subwoofers as in the case of not having any, we will mount the following
artec
320
below the first enclosure, for which we need a
JP-320
, one piece for each side, with the desired angles.
The screws
removed are used
as safety pins
Max. 5º between
artec 322S
and
artec 320
Always 0 °
between two
artec 322S
To determine
which screw
to disassemble
of the pair
that appear together
depends on whether
the chosen angle is
in the front arch (front
screw) or rear arch
(rear screw)
+0º
+4º
+0.5º
+3º
+5º
+5º
+0º
+2º
+1º
FRONT
REFER TO USER'S MANUAL TO DETERMINE
SPLAY ANGLES BETWEEN CABINETS
0º
0º
