9
EN / CZone Touch 10 Generation 2 User & Installation Manual
3 Installation
3.1
Things You Need
•
Touch 10 Display
•
Metal Backing Frame (supplied)
•
Plastic Mounting Bracket (supplied)
•
Power Cable (supplied)
•
14 x Mounting Screws (supplied)
•
Mounting Template (supplied)
•
NMEA2000 drop cable and T-connector
•
3A Fuse
•
Screw driver and drill bits
•
Electrical Tools
3.2
Mounting Location
When selecting a location for the Touch 10 Display it is important to consider the following factors:
•
Ensure mounting wall thickness is 25mm or less (maximum supported by mounting bracket)
•
Ensure mounting compartment is of suitable size with adequate airflow
•
Ensure display is mounted in a location where it will not be subjected to excessive vibration
•
Ensure display is mounted in a location where the operator can easily use controls and clearly
see the screen
•
Ensure display is mounted in a location that allows proper routing, support and connection of
cables
•
Ensure cables have adequate strain relief to prevent stress on connectors
•
Select a location that is far enough away from devices that may cause interference, such as
motors, generators and radio transmitters/receivers.
•
The display has a high-contrast screen, and is viewable in sunlight, but for best results install
the unit out of direct sunlight.
Warning! Inadequate ventilation may cause the unit to overheat. The unit is designed to
operate in temperatures from 0° C to +50° C.
