11
EN / CZone® Control 1
2. Press the USB button for 5sec or until the LED flashes RED.
3. Wait for the USB LED to turn solid green before removing it, this operation can take 10-40minutes depending
on the number of different module types in the system. The Control 1 channel LEDs will sweep back and forth
when looking for devices of a particular type to update. Once devices of a particular type are found and are
being updated, the LEDs will indicate progress for this update.
4. Once the firmware has been updated the following files will be created/updated:
a) *.csv - A basic spreadsheet listing information about the system and modules connected to the network.
b) CZone USB Result.txt - A text file describing the result of the last operation performed, as well as these
instructions.
