9
EN / CZone® Waterproof Keypad User & Installation Manual
INITIAL POWER UP
2.4.1 Standalone Installation (with Smart Harness)
1. Power up the system.
2. Turn the switch/circuit breaker on supplying power to the system and networked modules (if fitted).
3. The LED indicators will flash as the system boots.
4. To toggle a circuit to momentary functionality, press and hold the power button and the button for that circuit
together on the CZone Waterproof Keypad for 5 seconds. Press and holding the same buttons will toggle that
circuit back to latching.
5. Test all circuits for ON/OFF functionality.
6. Check the circuit status LED’s for each individual circuit. Refer to LED codes to diagnose any faults which
need to be rectified.
2.4.2 Networked Installation (existing / new NMEA2000 network)
1. Power up the NMEA2000 network.
2. Check that the LED indicators flash to indicating the system is booting.
3. Turn the switch/circuit breaker on supplying power to output modules (if fitted).
4. Check the software version on the Waterproof Keypad with the CZone Configuration Tool and update if
necessary.
5. Ensure all dipswitches are set to match the configuration.
6. Write the configuration file to the network (Refer to the CZone Configuration Tool Instructions for details on
how to write a CZone configuration file).
7. Test all outputs for correctly configured functionality.
8. Check the circuit status LED’s for each individual circuit. Refer to LED codes to diagnose any faults which
need to be rectified.
