SERVICE
BULLETIN
Czech Sport Aircraft a.s.
Na Záhonech 212,
686 04 Kunovice
Czech Republic
No.: SB-SC-055
Date: 2018-08-20
Rev.: -
Page: 15 of 25
Date: -
16)
Install the fuel return line into the system of fuel installation located in the fuselage (see the diagram
in Fig. 28 + see figures shown in Sections No.16a through 16f). Install the fuel return line according
to the following instructions:
a)
In the angle piece riveted on the firewall, drill and deburr the hole having a diameter of 4.1 mm (.161
inch) intended for fastening the fuel return line (see Fig. 26).
b)
Cut the hose of fuel system installation pressure line with the protective PYROJACKET hose. Slide
the shrinkable hoses, that were cut before, onto the PYROJACKET hoses. Insert the T-coupler with
the restriction jet into the pressure line of fuel installation. Connect the pressure line hoses
to the above-mentioned T-coupler by means of hose clamps (see Fig. 25).
Fig. 24
Pyrojacket
Fuel hose FUB 386
Typical connection
of fuel system
installation branch
to aggregate or
valve fitting
Fig. 25
Thermofit CGPT
Hose clamp
Содержание SportCruiser
Страница 25: ......
