Cytron MDDS30 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 22

Cytron MDDS30 Скачать руководство пользователя страница 9

ROBOT.HEAD to TOE

Product User’s Manual -

MDDS30

5. POWER SUPPLY

SmartDriveDuo-30 supports battery with input voltage ranges from 7V to 35V. The

recommended power sources are:

●

6 – 18 cells NiMH or NiCd battery.

●

3 – 6 cells LiPo or Li-Ion battery.

●

7V – 35V sealed lead acid battery.

●

7V – 35V power supply.

MUST BE IN PARALLEL WITH A BATTERY WITH SAME VOLTAGE

The power source can be connected to SmartDriveDuo-30 either via the terminal block, or

soldered directly to the pad at the bottom layer.

THERE IS NO POLARITY PROTECTION ON

MDDS30, PLEASE DOUBLE CHECK THE CONNECTION BEFORE CONNECTING TO THE

BATTERY.

NOTE

If a power supply that cannot sink current is being used (example: bench top and AC to DC
switching power supply), the input voltage will rise when the driver is regenerating (motor

is slowing down, or being pushed by external force). Thus, it is important to connect a

battery with same voltage in parallel with the power supply to absorb the current

generated by the motor. Else, the input voltage might rise to a level where

SmartDriveDuo-30 can’t handle and it will be destroyed permanently or the power supply

trigger protection mode.

Created by

Cytron Technologies Sdn Bhd

– All Rights Reserved

Back to

INDEX

8

«
...
7
8
9
10
11
...
»

Содержание MDDS30























Отзывы:

Нет отзывов