ROBOT.HEAD to TOE
Product User’s Manual -
MDDS30
1
ON
The center point is fixed at 1.5ms and the timeout feature is disabled.
Motor will continue to run with previous speed if new signal is not
detected. This is useful when a microcontroller is used to control the
motor. The microcontroller does not need to send the pulse
continuously to the SmartDriveDuo-30. Instead, it only needs to send a
single pulse when the speed or direction of the motor needs to be
changed.
0
- OFF
1
- ON
X
- Don’t care
Common DIP switch settings for RC input mode
●
RC Mode with RC transmitter/receiver (Mixed)
ON
1 2 3 4 5 6 7 8
*Sample connection for MDDS30 with RC receiver. The channels on RC receiver is depend
on your RC controller’s setting.
Created by
Cytron Technologies Sdn Bhd
– All Rights Reserved
Back to
INDEX
13
