1. Stackable Digital I/O Headers
Digital I/O pins stacked to the Arduino main board.
2. RX Pin Selector
User may select D0, D2, D8, D10 or USB
*
as the RX pin from Arduino main board with the
mini jumper.
3. TX Pin Selector
User may select D1, D3, D9, D11 or USB
*
as the TX pin from Arduino main board with the
mini jumper.
4
.
Stackable Analog Input Header
This is the analog port of the Arduino. The stackable header allows other stacked shield to
utilize these pins.
5.
Stackable Power Pins Header
This is the power port of the Arduino. The stackable header allows other stacked shield to
utilize these pins.
6. Main Board reset button
Arduino main board will require around 30ms to ready after reset.
7. Power indicator LED (Green)
Indicator to shows that power is supplied to Cytron XBEE Shield.
8. Receiver status LED
RX is a LED connected to XBee’s receiver (DIN, pin 3). This LED will blink if XBee
receiver pin receives data from either USB or microcontroller..
9. Transmitter status LED
TX is a LED connected to XBee’s Transmitter pin (DOUT, pin 2). This LED will blink when
XBee module transmit data.
10. XBee module socket
User may plug in XBee, XBee PRO or BlueBee to this socket. Please mind the polarity of
XBee, ensure pin 1 is plug in at left top pin of the socket.
11. ASSC status LED
ASSC is active high LED which is connect to Associate (pin 15) of XBee module.
12. RSSI status LED
RSSI is active high LED which is connect to RSSI (pin 6) of XBee module.
13. Wireless Programming solder jumper.
Solder the pads together for wireless programming, this pin is used to reset the arduino main
board. It is connected to XBee module pin of DIO3.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
8
