ROBOT . HEAD to TOE
Product User’s Manual – IFC-CP04
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
5
4. BOARD OR PRODUCT LAYOUT
A – is a 2X16 character LCD which allow user to show message, program status or condition
for input/output.
B – is the orientation marking on IFC-MD15A. Every IFC card will have this orientation
marking, this is to help user in ensuring the cards are stack correctly..
C – is reserved for Manufacturing Test Point.
Please
DO NOT
short or connect wire to any
of these pins.
D – are side connector for stack card and communication between cards.
E – is PIC microcontroller which used as controller for this slave card.
F – are 4 push buttons for user to select different options and modes that have been
predefined by user.
G – is a preset that allow user to adjust the contrast of LCD. Turn to clockwise will increase
the contrast while turn to counter clockwise will decrease the contrast.
H – is a push button with the function of Reset for Main Board.
Label Function Label
Function
A
2X16 characters LCD
G
Preset
B
Orientation marking
H
Reset Button
C
Manufacturing Test Points
I
Selector for communication address
D
Side connector
J
Status Indicator LED
E
PIC Microcontroller
K
Arrow
F
Push buttons
D
A
D
F
H
G
E
J
I
B
C
K
