Procedure:
1. Firstly, remove all the footer of the hotspot to ensure that the hotspot can fit nicely in the
outdoor enclosure.
2. Using the cable tie, mount the hotspot and PoE splitter onto the ABS plate. You can
arrange any position that you like but we recommend following our setup position.
●
Note:
Please use a thin cable tie (1.5mm width) so that it can go through the plate holes.
3. Put aside the plate. Now, we have to drill two holes on the enclosure for the ethernet
connector and coaxial cable to extend the antenna. For
ethernet connector hole
, drill
until it reaches
20mm
step and for
coaxial cable hole
only
6mm
.
2
