Cytron Technologies Arduino Uno R3, Руководство пользователя

Страница: 8 / 20

ROBOT.HEAD to TOE
Product User’s Manual - MAKER-UNO
4. BOARD LAYOUT
LABEL FUNCTION
A
ON BOARD PIEZO BUZZER
Piezo buzzer is connected to pin 8 through slide switch (labeled B).
B
PIEZO BUZZER SLIDE SWITCH
Slide switch to connect between pin 8 to piezo buzzer (labeled A). To use piezo buzzer, slide the
switch on and program the buzzer. To use pin 8 for other purpose, slide the switch off.
C
VOLTAGE REGULATOR 3.3V
Voltage regulator 3.3V used to regulate 5V USB to 3.3V and connected to pin 3.3V (labeled I).
D
LED INDICATOR FOR USB-SERIAL
Indicates USB-Serial data for uploading process or debug purpose (Serial Monitor).
E
USB MICRO B CONNECTOR
Main supply for Maker Uno. Used for program and debug purpose (Serial Monitor) too.
F
USB-SERIAL IC CONVERTER (CH340G)
Converts USB data to serial data. Used for program and debug purpose (Serial Monitor).
G
RESET BUTTON
Bu on to restart Maker UNO program.
H
PROGRAMMABLE BUTTON
This bu on is connected to pin 2 and GND. To use it, user need to configure it as INPUT_PULLUP.
I
ARDUINO UNO R3 STANDARD FEMALE PIN HEADER
Maker UNO female header pin follows Arduino UNO R3 standard. The only difference is, Maker
UNO does not have Vin.
Created by
Cytron Technologies Sdn Bhd
– All Rights Reserved
Back to INDEX 7