3.3
Removing an AxiChrom 300-600 wheel kit
When the column has been rolled into position at the intended location, remove the
wheel kit from the column as described below.
Step
Action
1
Adjust all feet until they have the same distance between the floor and stand,
90 to 110 mm.
2
Turn the trolley to one of the sides as the following image shows.
Lower the front of the column, by raising the handle on the trolley. The handle
should now stand vertically.
3
If necessary, remove the safety pin and loosen the height adjusting screw to
be able to relieve the weight from the trolley knob
D. Remove the trolley.
B
D
C
E
S
4
Unscrew the bolts
B and remove the trolley bar from the front of the column
stand.
AxiChrom wheel kit Instructions 29145462 AB
13
