Cytech KP04AE, Руководство пользователя

Страница: 8 / 12

Voice Broadcast
This determines if the KP04A broadcast Voice messages
from CM9001, e.g. Announcements of Security Off,
Away Mode, beeping and siren tones, alarm and zone
announcements. This can be turned off when the KP04A
is installed in a bedroom or rooms where people are not
to be disturbed.
Keypad Tamper
This determines if the Tamper alarm is activated when
the Front housing is removed from the base. Also you
can remove the Front housing without Tamper alarm
by going to Security Check Mode (F3,2 on the keypad),
which announces zones and tamper events without
causing alarms.
Date Format
Select between various date formats
Time Format
Select between various time formats
LCD Contrast
Select LCD Contrast 0 to 63
BackLight Off
Select the brightness of the backlight when it is in the
off state (after timeout). Values 0 to 31 . Higher value
allows the LCD to be read even when backlight is off.
Save Menu
Save and Apply - Yes, No (default NO)
“Yes” causes settings to be saved and KP04AT to reset
“No” causes changes to be lost and exit from Settings
menu
Press F again to confirm the selection (Yes/No).
The settings menu will exit without changes after 25
seconds without any key pressed.
To discard any changes you must press F in
settings to go to Save Menu and select NO.
KP04A Settings in Comfigurator
The KP04 settings can also be changed in Comfigurator,
and can also be read from the KP04A to Comfigurator.