User Instructions
Cyrus DVD7
2
GB
GB
Welcome to the world of
Cyrus!
Congratulations on your choice of
Cyrus
Audio-Visual products. Our state-of-the-
art design technology and outstanding quality of manufacture has won
countless awards around the world. We are confident that you will derive
great pleasure from owning a product from one of the most recognised and
respected manufacturers of audio-visual equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your
Cyrus DVD7
safely and correctly.
Preparations for Installation
Before installing the
DVD7
check that the following items are included in the
accessory box.
•
Warranty Card (with instruction manual)
•
AC Mains Cable
•
Remote Control Handset
•
2 x Phono leads for MC-Bus connection
•
SCART output cable
After removing these items, please retain the packaging.
Install the
DVD7
in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the
DVD7
under another unit or on
any surface likely to hamper its cooling or ventilation.
INSTALLATION
(Refer to Fig.1)
Key to the rear panel drawing:
1. Digital Audio Output
6. S-Video output
2.
Optical Audio Output
7. Composite video output
3.
Analogue Audio output
8. AC power inlet
4.
MC-Bus connections
9. PSX-R connection
5.
SCART A/V output
Connecting the Video Output to a Television
The video output of the
DVD7
may be connected to the television in three
different ways. The choice of connection and the picture quality achieved will
depend on the options available at the TV. The connections available from the
DVD7
are-
AV CONNECTOR OUT socket
e
(SCART connection). This is the most
convenient connection. The SCART connector includes both RGB and
composite video signal formats. This connection will provide the best picture
quality results where the television is equipped with RGB input via the SCART
connection. When connecting a projector or monitor equipped with individual
connectors for RGB input, a SCART breakout cable will be required.
S-Video (Y/C) connection from the S-VIDEO OUT socket
f
. This system
offers superior quality to a composite connection and should be used if the TV
has no SCART input or if the SCART input does not include RGB
connections.
Composite connection from the VIDEO OUT socket
g
. If SCART or S-VIDEO
connections are not available, a single phono connection may be made from
this socket to the video input of the television.
Connecting Digital Audio to a Multichannel
Surround Sound Decoder
For Multi-Channel surround sound systems the COAXIAL
a
or OPTICAL
b
digital audio outputs from the
DVD7
must be connected to a suitable input of
a
Cyrus
digital surround sound decoder.
Connecting Audio to a Stereo System
If a Surround Sound decoder is not to be used the STEREO audio outputs
c
of the
DVD7
may be connected to a Cyrus stereo amplifier or preamplifier.
The VI or AV inputs are recommended for this.
Connecting the Audio Output to a Television
If DVD sound is required from the television, the audio output from the
DVD7
may be connected to the television in two different ways. The connections
available are-
SCART connection from the AV CONNECTOR OUT socket
e
. If the SCART
connector is in use for video connection, stereo audio will automatically be
connected through the same cable.
STEREO audio output
c
. If S-Video or composite video connections are in
use to the television then a separate audio connection may be made from the
audio output sockets
c
.
Connecting a
Cyrus PSX-R
The
Cyrus PSX-R
is a high quality regulated power supply, the use of which
will elevate your
DVD7
into a true world-class state-of-the-art product.
The connector fitted to the umbilical cable from the
PSX-R
must be securely
connected to the
PSX-R
socket
i
on the rear of the
DVD7
. When correctly
fitted, the connector will latch into the socket.
Note:
The
PSX-R
power supply and the
DVD7
will both require connection to
the mains supply.
Mc-Bus System Connection (Optional)
By using the MC-Bus connection on your
DVD7,
a highly functional integrated
system with full remote control may be set up. This feature is usable if you
own a
Cyrus
amplifier or digital surround decoder. Refer to the relevant
product handbook for MC-Bus wiring instructions.
Downloaded From Disc-Player.com Cyrus Manuals