User Instructions
Cyrus DVD7
8
GB
GB
TROUBLESHOOTING GUIDE
If your
DVD7
is not operating properly, disconnect the power and check all
connections using the notes in this handbook. If problems persist, the
checklist below may help.
If you are in any doubt, consult your dealer.
Disc Spinning with no picture or sound (all discs)
Switch off the power to the system and check that connections have been
correctly made from the
DVD7
to the TV, amplifier or surround decoder.
Check that all equipment is switched on and that the correct input is selected
at the TV, amplifier or surround decoder.
Disc Spinning with no sound (one particular disc)
Check in the disc MENU that the correct audio mode is selected for your
system.
Region warning displayed when a disc is loaded
Check that the region symbol on the disc matches the region symbol on the
rear panel of the player (number with a globe symbol). To avoid this problem
ensure that discs are only purchased in the same global region as the player.
Picture stops and jumps to another scene
The disc may be dirty or badly scratched. Try playing another disc. If the other
disc plays ok, try cleaning the 1
st
disc.
NOTE:- Some discs feature dual layers. Playback will pause momentarily
whilst the player changes layer. This will only happen once during playback of
such discs.
DVD7
will not select all tracks on an audio disc
Auto FTS may be set with a program stored. This will play only the memorised
favourite selection of tracks.
No display
The display may have been switched off at the handset. Press the display key
again to restore the display and backlight.
No Remote Operation
The handset batteries may need to be replaced:
Remove the battery compartment cover located underneath the unit. Remove
the batteries and replace with new ones carefully noting the orientation
marked in the bottom of the battery case.
The batteries in the unit should only be replaced with new batteries type AAA
(I.E.C. LR03).
Laser Product
WARRANTY
SPECIFICATIONS
Power Supply
Voltage:...........................................................................As plate on rear of unit
Power Consumption
Playing .........................................................................................................20W
Standby........................................................................................................10W
Safety Requirements ........................................................................... EN60065
Enclosure
Dimensions (WxHxD) ............................................................215 x 75 x 365mm
Weight...........................................................................................................3Kg
Material ..................................................................................... Die cast chassis
Analogue Audio Performance
Audio Output Level ...............................................................................2.1V rms
Output Impedance ......................................................................................47
Ω
Frequency Response......................................................................20-20,000Hz
Channel Separation..................................................................>110dB @ 1kHz
>100dB@20kHz
SNR (using silent track)....................................................................... >100dBA
THD @ -10dB ......................................................................................... 0.005%
Digital Audio Performance
PCM Output compatibility ..........................................................44.1kHz, 48kHz
...............PCM 24/96kHz (downsampled to 48kHz)
Surround output compatibility................................................Dolby Digital, DTS
Output level.............................................................................................0.5Vp-p
Output Impedance ......................................................................................75
Ω
Video Performance
Output formats .................................................RGB, S-Video (Y/C), Composite
Output level........................................................................................... 1V pk-pk
Output Impedance ......................................................................................75
Ω
Cyrus
reserves the right to change all specifications without notice. E &OE
The warranty card enclosed should be completed by the Dealer and
the purchaser and returned to
CYRUS
or its Distributor within 8 days
of purchase. No Dealer or Distributor may vary the terms of this
warranty which is personal to the original Purchaser and is not
transferable.
Please retain the sales receipt as proof of purchase.
Warranty claims must wherever possible be made through the Dealer
from whom the equipment was purchased.
This warranty excludes:
•
Damage caused through neglect, accident, misuse, wear and
tear, or through incorrect installation, adjustment or repair by
unauthorised personnel. Any unauthorised servicing will result in
loss of guarantee.
•
Liability for damage or loss occurring in transit to or from the
purchaser.
•
Consequential damage, loss or injury, arising from or in
conjunction with this equipment.
Equipment for attention under warranty should be consigned return
carriage paid. If returned equipment is found to comply with the
published specification, CYRUS reserves the right to raise a charge.
The above conditions do not affect your statutory rights as a
consumer.
This label on the rear panel tells
you that the unit contains a Laser
component. Opening this unit will
expose the user to radiation from
the laser beam.
Downloaded From Disc-Player.com Cyrus Manuals